Free Hair Bow Instructions - How to make simple bow holders
32 inches (81.3 cm) of 7/8" ribbon
32 inches (81.3 cm) of 3/8" ribbon
A 1-inch size D-ring (available online at ribbon stores like The Ribbon Retreat)
Hot glue gun and glue OR sewing machine and basic sewing supplies
1. Cut your ribbons to size, and layer the 3/8" ribbon on top of the larger ribbon.
2. Fold the ribbon over the flat side of the D-ring, about 1 inch (2.25 cm).
3. Sew the ribbon in place horizontally, or hot glue it to the back.
Don't attach the 3/8" ribbon vertically down the middle. The smaller ribbon is there so you'll be able to add small clippies that won't fit on the larger ribbon!
Hang the bow holder on your wall, and enjoy!
Seller tips: Seal all ends. If you plan to market these, you can add a hair bow to the top of the holder to make it prettier and entice customers to buy. Another idea - give these simple bow holders away as free gifts for customers who place large orders OR as an incentive for people to buy some of your more expensive bows.